- RJ45 plug for unshielded solid wire 26-24AWG (3 prong).
- 50 u” gold plated over nickel on contact.
- 100 cái/hộp.

- The DINTEK twin tester provides instant identification of most common voice and data cabling problems including shorts, opens, reversals, and incorrect polarity.
- The master and remote units separate for end-to-end testing of installed cabling or work sparatelly as 2 patch cord test unit. Both pieces simply snap and lock together when not in use, making it easy to carry and store.Designed to fit neatly into a toolbox or pocket, the UTP tester has a convenient ‘ring’ feature for attaching to a belt of frame. The UTP tester should be used to check each channel from the station device to the system.
- Innovative 2-in-1 design features modular jacks for testing USOC and 568A/B cabling systems
- Accurately verifies the continuity and sequence of 1-,2-,3-, and 4-pair voice and data channels
- Continuously-sequencing LED display provides a diagnostic readout that immediately detects shorts, opens, reversals, and mis-wires at a glance
- Simply snap and lock master and remote units together when not in use
- Ergonomically designed hand-held unit is light weight, rugged, and impact-resistant
- 9 volt alkaline battery excluded
- Carry case included
Technical specification:
- Materials: ABS
- Distance: 1,000m (3,280ft)
- Power requirements: 9 volt battery(standard or alkaline)
- Weight: 240g (9 oz.)
- Built-in interface: USOC,EIA 568B
- Contact specification: 30 u” gold over nickel

- Industry Standard:
- UL, listed
- Meets FCC parts 68
- EN50173
- ISO/IEC 11801
- Meets EIA/TIA T568B: Cat.5e Hardware transmission performance
Physicals:
- IDC connector accept 22-26 AWG solid wire
- Jack wiring:50 u” gold plated over 100 u” nickel
- Housing:High impact flame retardant plastic UL 94V-0 rated
- IDC connector suitable for 110 punch down and Krone tool
Mechanical:
- Plug insertion life:750 cycle min.
- Plug retention force:30 lbs min.
Electrical:
- Current rating: 1.5 Amps
- Insulation resistance: 500Mega-ohms min.
- Contact resistance: 20 milli-ohms max.
- DC resistance: 0.1 ohms max.
- Data transmission rates up to 100Mbps

- RJ-45 CAT.6 S-FTP modular plug - shielded bọc kim loại chống nhiễu, đầu R-J45 gồm 2 thành phần ghép lại, sử dụng cho cáp CAT.6 S-FTP.
- 100 cái/hộp.

- RJ-45 CAT.6 S-STP modular plug - shielded bọc kim loại chống nhiễu, đầu - R-J45 gồm 2 thành phần ghép lại, sử dụng cho cáp CAT.6 S-STP.
- 100 cái/hộp.

- Cat.6 RJ45 plug for unshielded solid wire 26-24AWG 3 prong
- Contact Material: Phosphor Bronze
- Contact Plating: 50u” Gold plated Over 100u”-Nickel Plated.
- Contact Resistance: 10 milli ohms Max.
- EIA/TIA568B.2-1 performance.
- 100 cái/hộp.

RJ45 plug for shielded solid wire 26-24AWG (3 prong).
- 50 u” gold plated over nickel on contact.
- 100 cái/hộp.

- Màu: đỏ, cam, vàng, xanh, dương, xám, trắng, đen.
- 100 cái/hộp.

Modular Jack - ổ cắm thoại RJ11 Keystone Jack Dintek Cat.3 unshielded.

Transmission performance:
- Meets all cat.6 channel performance requirements specified in TIA/EIA-568B.2-1
Electrical:
- Electrical insulation resistance: 10 mega ohms min.
- Dielectric with standing voltage: 1,000 V, RMS, 60Hz, 1min.
- Contact resistance: 20 milli ohms max.
- Current rating: 1.5 AMPS at 20°C
Physical:
- Housing: High-impact, flame-retardant plastic, UL94V-0 rated.
- Spring wire/contact blades:
- Material: Phosphor Bronze alloy.
- Plateing: 24 Carat hard gold (50u” plating thickness) over 100u” nickel.
- Shell: Brass alloy plated with 100u” nickel.

Industry Standard:
- UL, listed
- Meets FCC parts 68
- ANSI/TIA/ EIA-568B
- ISO/IEC 11801
- ETL verified TIA/EIA T568B.2-1: Cat.6 channel link transmission performance
Electrical:
- Current rating:1.5 Amps
- Insulation resistance:500Mega-ohms min.
- Contact resistance:20 Milli-ohms max.
- DC resistance:0.1 ohms max.
- Data transmission rates up to 250Mbps
Physicals:
- IDC connector accept 22-26 AWG solid wire
- Jack wiring:50 u” gold plated over 100 u” nickel
- Housing:High impact flame retardant plastic UL94V-0 rated
- IDC connector suitable for 110 punch down and Krone tool

Electrical:
- Electrical insulation resistance: 10 mega ohms min.
- Dielectric with standing voltage: 1,000 V, RMS, 60Hz,1min.
- Contact resistance: 20 milli ohms max.
- Current rating: 1.5 AMPS at 20°C
Transmission performance:
- Meets all cat.5e channel performance requirements specified in TIA/EIA-568B.2
Physical:
- Housing: High-impact, flame-retardant plastic, UL94V-0 rated.
- Spring wire/contact blades:
- Material: Phosphor bronze alloy.
- Plating: 24 Carat hard gold (50u” plating thickness) over 100u” nickel.
- Shell: Brass alloy plated with 100u” nickel.

- 4 Port Wallplate with Shutter,U.S. type, 70 X 114 mm.

- 2 Port Wallplate with Shutter,U.S. type, 70 X 114 mm.

- 1 Port Wallplate with Shutter,U.S. type, 70 X 114 mm.

- 2 Port Surface Mount Box with Spring Shutter, 65x76x27mm.

- 1 Port Surface Mount Box with Spring Shutter, 65x48x27mm.

- Cat.6 19” 110/ krone dual type Patch Panel 24 ports, 1U size.

- Cat.5e 19” 110/ Krone Patch Panel 48 ports without Shutter, 2U size.

- Cat.5e 19” 110/Krone type fully shielded patch panel 24 ports, 1U size.
Transmission:
- Meets all categtory 5e channel performance requirments specifed in TIA/EIA 568-B.2
Electrical:
- Insulation resistance: 10 Mega ohms min.
- Dielectric with standing voltage: 1,000 Volts, RMS, 60Hz, 1min.
- Contact resistance: 20 milli ohms max.
- Current rating: 1.5 AMPS at 20°C
Physical:
- Housing: High-impact, flame-retardant plastic, UL94V-0 rated spring wire/contact blades.
- Material: Phosphor Bronze Alloy.
- Plateing: 24 Carat hard gold (50u” plating thickness) over 100 u” nickel.
- Sheel: Brass alloy plated with 100u” nickel.
- Plate: SPCC-SD 16G.

- Cat.5e 19” 110/ Krone Patch Panel 24 ports w/o Shutter, 1U size.

- In-wall box(U.S. type), 48x69.8x114 mm

- Patch panel Wire manager
- 19” Rear cable management.

- 19” Cat.3 Patch Panel, 50 port, 1U size.
- Used in voice and low speed data applications.
- With grounding wire

- 19” Cat.3 Patch Panel, 25 port, 1U size.
- Used in voice and low speed data applications.
- With grounding wire

- Patch panel 48 Port Dintek, CAT.6, 19 inch rackmount, Krone type
– Sản xuất tại Taiwan

- Patch panel 24 Port, CAT.6A, 19 rack mount, dạng tháo lắp cho từng port, bao gồm 24 ổ cắm Cat.6A và kệ cố định cho 24 sợi cáp mạng Cat.6A

- 200x Microscope x 1
- Light pen x 1
- Syringe x 1
- Carbide scribe x 1
- Stripper x 1
- A/B fast epoxy glue x 1
- ST & SC polish disc x 1
- Glass working pad x 1
- Wipe paper x 3
- Kevlar cutter x 1
- Crimp tool x 1
- Cleanser x 1
- Rubber working pad x 1
- 6um/1um/0.05um diamond polish film x 1

- Turning 3 circles to extract the jacket of UTP cable, Dual function of stripper and 110 tool.

- For seating wires into connecting blocks, and cuts off wire end after termination.

- Crimping for RJ12(6P) and RJ45(8P) plug, suitable for solid and stranded wire used.

- Thanh quản lý cáp 1U, lắp trên rack 19 inch.
- Cable wire management.
- Part number: 2304-01003.