hỗ trơ

Tìm Kiếm

BỘ TEST CÁP MẠNG DINTEK-UTP CABLE TWIN TESTER

BỘ TEST CÁP MẠNG DINTEK-UTP CABLE TWIN TESTER
Mã SP CABLE TWIN TESTER
Mô tả - The DINTEK twin tester provides instant identification of most common voice and data cabling problems including shorts, opens, reversals, and incorrect polarity.
- The master and remote units separate for end-to-end testing of installed cabling or work sparatelly as 2 patch cord test unit. Both pieces simply snap and lock together when not in use, making it easy to carry and store.Designed to fit neatly into a toolbox or pocket, the UTP tester has a convenient ‘ring’ feature for attaching to a belt of frame. The UTP tester should be used to check each channel from the station device to the system.
- Innovative 2-in-1 design features modular jacks for testing USOC and 568A/B cabling systems
- Accurately verifies the continuity and sequence of 1-,2-,3-, and 4-pair voice and data channels
- Continuously-sequencing LED display provides a diagnostic readout that immediately detects shorts, opens, reversals, and mis-wires at a glance
- Simply snap and lock master and remote units together when not in use
- Ergonomically designed hand-held unit is light weight, rugged, and impact-resistant
- 9 volt alkaline battery excluded
- Carry case included
Technical specification:
- Materials: ABS
- Distance: 1,000m (3,280ft)
- Power requirements: 9 volt battery(standard or alkaline)
- Weight: 240g (9 oz.)
- Built-in interface: USOC,EIA 568B
- Contact specification: 30 u” gold over nickel
Giá 560.000 VND
Lượt xem 678
Chia sẻ
Sản phẩm liên quan
ĐẦU NỐI RJ-45 DINTEK CAT.5E MODULAR PLUG
- RJ45 plug for unshielded solid wire 26-24AWG (3 prong).
- 50 u” gold plated over nickel on contact.
- 100 cái/hộp.

ĐẦU NỐI RJ-45 DINTEK CAT.5E MODULAR PLUG

Giá: 410.000 VND

MODULAR JACK-Ổ CẮM DINTEK CAT.5E KEYSTONE JACK
- Industry Standard:
- UL, listed
- Meets FCC parts 68
- EN50173
- ISO/IEC 11801
- Meets EIA/TIA T568B: Cat.5e Hardware transmission performance
Physicals:
- IDC connector accept 22-26 AWG solid wire
- Jack wiring:50 u” gold plated over 100 u” nickel
- Housing:High impact flame retardant plastic UL 94V-0 rated
- IDC connector suitable for 110 punch down and Krone tool
Mechanical:
- Plug insertion life:750 cycle min.
- Plug retention force:30 lbs min.
Electrical:
- Current rating: 1.5 Amps
- Insulation resistance: 500Mega-ohms min.
- Contact resistance: 20 milli-ohms max.
- DC resistance: 0.1 ohms max.
- Data transmission rates up to 100Mbps

MODULAR JACK-Ổ CẮM DINTEK CAT.5E KEYSTONE JACK

Giá: 70.000 VND

ĐẦU NỐI RJ-45 DINTEK CAT6 S-FTP MODULAR PLUG
- RJ-45 CAT.6 S-FTP modular plug - shielded bọc kim loại chống nhiễu, đầu R-J45 gồm 2 thành phần ghép lại, sử dụng cho cáp CAT.6 S-FTP.
- 100 cái/hộp.

ĐẦU NỐI RJ-45 DINTEK CAT6 S-FTP MODULAR PLUG

Giá: 1.500.000 VND

ĐẦU NỐI RJ-45 DINTEK CAT6 S-STP MODULAR PLUG
- RJ-45 CAT.6 S-STP modular plug - shielded bọc kim loại chống nhiễu, đầu - R-J45 gồm 2 thành phần ghép lại, sử dụng cho cáp CAT.6 S-STP.
- 100 cái/hộp.

ĐẦU NỐI RJ-45 DINTEK CAT6 S-STP MODULAR PLUG

Giá: Vui lòng gọi...

ĐẦU NỐI RJ-45 DINTEK CAT6 MODULAR PLUG
- Cat.6 RJ45 plug for unshielded solid wire 26-24AWG 3 prong
- Contact Material: Phosphor Bronze
- Contact Plating: 50u” Gold plated Over 100u”-Nickel Plated.
- Contact Resistance: 10 milli ohms Max.
- EIA/TIA568B.2-1 performance.
- 100 cái/hộp.

ĐẦU NỐI RJ-45 DINTEK CAT6 MODULAR PLUG

Giá: 600.000 VND

ĐẦU NỐI BỌC KIM LOẠI RJ-45 DINTEK CAT.5E
RJ45 plug for shielded solid wire 26-24AWG (3 prong).
- 50 u” gold plated over nickel on contact.
- 100 cái/hộp.

ĐẦU NỐI BỌC KIM LOẠI RJ-45 DINTEK CAT.5E

Giá: 630.000 VND